This is a guide for Air 1 pairing issues. Are you looking for help with Air 1 Go, Air 1 Plus or Air 1 ANC ?
Charge your Air 1Before using, make sure Air 1 is charged. Place them in the charge case for at least 15 minutes before first use. The headphone LED-lights will show a solid light when charging. If not, the charge case itself might need charging via the included Micro-USB cable. |
||
Pair the EarbudsTake the earbuds out of the case and hold them close to each other. The LED-lights will blink rapidly. When paired, the Left earbud LED will turn off while the Right LED will blink slowly. Air 1 is now ready to be connected to your bluetooth device. |
||
Connect to your DeviceGo into your device and enable Bluetooth. In the list of new devices you should find Air 1 by Happy Plugs |
||
If your device cannot find your Air 1 headphones, try repeating the steps above. If still not working, you might need to perform a factory reset. Please refer to this guide on how to reset. |
Comments
0 comments
Article is closed for comments.